How To Fix a Slow Draining Sink-Slow draining sinks are the most common plumbing problem people face. It usually happens when some foreign particles get inside the pipes. To tackle this issue, you must identify the cause as soon as possible.
 These particles can be anything from hair to soap. Some of the most common causes are hair in the sink, hair in the pipes, and soap or shampoo residue. If you suspect any of these particles are blocking your drain, you must do a few things to clear it.
If you want to gain information for how to clear a slow drain . Here are some tips to help you out.
Use A Mixture Of Vinegar And Baking Soda
Various DIY methods can help you clear your slow-draining sink, but the mix of vinegar and baking soda is the best. You must pour half a cup of baking soda into your drain and add white vinegar. Let it sit for approximately one hour and then see the magic.
If you do not have white vinegar at the moment, you can also use lemon juice instead. Lemon juice is acidic and can be used to fix this problem. After waiting for an hour, run the tap with hot water. This entire process will fully clean your pipes.
Take The Help Of A Plunger
Many people think plungers are only meant for toilets, but it is not valid. You can keep a separate plunger for your sinks. They are also available in small sizes, making the cleaning job more manageable. Before starting this cleaning task with a plunger, ensure to put tape over the sink hole. This will help create a seal. After taping the hole, the plunger can quickly build pressure and remove all the debris from your pipe.
Remove Foreign Particles By Using The Zip-It Tool
This is another method to clear a slow drain. The zip-it tool helps remove all the debris and hair trapped in the drain. It is an affordable tool that works wonderfully. You have to put this tool in your drain and pull it out. When you pull it out, it removes all the foreign particles inside the drain. The zip-it tool is thin, so it easily fits the pipe for cleaning. If you do not already have this tool, you must get one.
Removing The Trap Of The Sink
Cleaning the sink trap is also essential to improve the function of your drainage. A sink trap is present under the sink and is attached to the washer and plug. It is U-shaped and connected directly to the sink. Ensure to place a bucket under the sink before removing its trap. This will ensure that all the water gets collected in the bucket and you do not create a mess on the floor. After removing the trap, clean it properly and then reinstall it.
Check Your Pipes
If none of the above methods is helping you to fix the slow draining sink, you need to check the piping system for any leakage. It is not easy to identify the leaks. So you may require some professional help.
Try a boil Water
Boiling water can make an excellent finishing touch to the following techniques, such as the baking soda and vinegar solution. According to Benjamin Franklin Plumbing, you can unclog a clogged kitchen sink by heating some water on the stove and pouring it down the drain.
The only major downside to this approach is that it will not work on vinyl piping. If you’re not careful, the hot water may bake the pipes and possibly result in a complete pipe replacement. Just be sure to examine all your plumbing materials ahead of time!
Cleaning Sink Overflow is a must.
Another purpose of an overflow opening is to divert water into the drain if it rises too high in the sink, of course. But another purpose is to allow air into the drain when the sink is filled with water. The air that goes into the drain through the overflow helps water in the sink to drain faster. Debris and clutter can collect in the overflow as well, leading you to discard water more slowly. Ensuring that the drain is clean will additionally help.
Conclusion
For how to clear a slow drain, you must use a combination of DIY methods and professional help. There are various ways to clean. Your blocked sink. Some popular ones include using a zip-it tool, plunger, mixture of vinegar and baking soda, and cleaning the sink trap. If these methods do not work for you, there might be some leakage in your piping system. Consider contacting a plumber if you cannot deal with the leaking pipes.